Crankshaft

SAFETY FIRST: Protective gloves and eyewear are recommended at this point.

Remove the crankshaft.

Slide the connecting rod to one side and check its side clearance with a feeler gauge.

(Connecting Rod Big End Side Clearance: ?.? - ?.?? mm or ?.??? - 0.0?? in)

Lay the crankshaft on a pair of V blocks (1) and use a dial indicator (2) with a magnetic base to check the amount of crankshaft runout. Compare your measurement with specification...

Assemble the crankcases. See the Crankcase Assembly topic for more information.

- - - To Continue Reading, Subscribe Now - - -

This is an abridged sample manual from Cyclepedia Press LLC.

See more at - http://www.cyclepedia.com/online-manuals/

Note: If you are viewing this document offline be sure to visit the latest version online at http://www.cyclepedia.com before attempting any repairs. Updates are made without notice.